Water Filling Machine Electrical Supply: What to Specify

Match the site’s electrical supply to the approved drawing and nameplates for the ordered water filling machine. A motor-power figure in a product table does not describe every electrical load in a complete bottling line.

List the supply characteristics

Record nominal voltage, phase arrangement, frequency, protective-earth provision and the location of the supply connection. Identify whether a neutral is available where the equipment design requires one. Keep these values attached to the order specification so the control panel, drives, motors and auxiliary circuits are assessed against the same supply.

Separate the filler from auxiliary loads

List treatment pumps, compressors, chillers, conveyors, labelers and packing equipment individually. Distinguish connected load from the load expected to run simultaneously. Motor starting and heating demand can affect the supply even when normal running consumption appears modest. Cable sizing, protective devices and earthing must be selected by the responsible electrical engineer using the installed equipment data.

Before energizing, reconcile the delivered nameplates and electrical drawing with the approved supply schedule. Any discrepancy belongs in the installation punch list. Do not change drive parameters or protection settings to make incompatible equipment run.